Cycle Modifier Buttons; Option Buttons - LG DLE3400 Serie Manual Del Propietário

36 OPERATION

Cycle Modifier Buttons

Sensor Dry cycles have preset settings that are
selected automatically. Manual Dry cycles have
default settings, but you may also customize the
settings using the cycle modifier buttons. Press
the button for that option to view and select other
settings.
Dry Level
Use this button to select the level of dryness for
the cycle. Press the Dry Level button repeatedly
to scroll through available settings.
• This option is only available with Sensor Dry
cycles.
• The dryer will automatically adjust the cycle
time. Selecting More or Very will increase the
cycle time, while Less or Damp will decrease
the cycle time.
• Use a Less or Damp setting for items that you
wish to iron.
Temp.
Use this button to adjust the temperature setting.
This allows precise care of fabrics and garments.
Press the Temp. button repeatedly to scroll
through available settings.
Time Dry
Use this button to manually select the drying time,
from 20 to 60 minutes, in 20-minute increments.
Use this for small loads or to remove wrinkles.
Use the More Time/Less Time buttons to add or
reduce the drying time in 1-minute increments.

Option Buttons

The dryer features several additional cycle options
to customize cycles to meet individual needs.
Certain option buttons also feature a special
function that can be activated by pressing and
holding that option button for 3 seconds.
Adding Cycle Options to a Cycle
1
Turn on the dryer and turn the Cycle selector
knob to select the desired cycle.
2
Use the cycle modifier buttons to adjust the
settings for that cycle.
3
Press the cycle option button(s) to add the
desired options. A confirmation message is
shown in the display.
4
Press the Start/Pause button to start the
cycle. The dryer starts automatically.
Wrinkle Care
Selecting this option will tumble the load
periodically for up to 3 hours after the selected
cycle, or until the door is opened. This is helpful
in preventing wrinkles when you are unable to
remove items from the dryer immediately.
Energy Saver
This option helps to reduce the energy
consumption of the Normal Cycle, depending on
the load size. When the Energy Saver option is
selected, the cycle begins with an air dry section
and the drying time is increased.
Turn off the Energy Saver option for a faster
Normal cycle which begins with heated drying. To
turn the Energy Saver default off, press and hold
the Energy Saver button. ON or OFF appears in
the display.