Kd-75X9405C Only - Sony Bravia KD-75X9405C Guía De Referencia

KD-75X9405C only

Your TV can be mounted on a wall using a Wall-Mount Bracket (not supplied) out of the box as
packaged.
Prepare the TV for the Wall-Mount Bracket before making cable connections.
For product protection and safety reasons, Sony strongly recommends that installation of
your TV on the wall be performed by qualified professionals. Do not attempt to install it
yourself.
• Follow the instructions provided with the Wall-Mount Bracket for your model. Sufficient
expertise is required in installing this TV, especially to determine the strength of the wall for
withstanding the TV's weight.
• Be sure to store the unused screws and Table-Top Stand in a safe place until you are ready to
attach the Table-Top Stand. Keep the screws away from small children.
1
Remove the screws from the rear of the TV.
2
Before installing the Wall-Mount Bracket, attach the Wall-Mount Attachment  (supplied
with the TV) to the rear of the TV (to make it parallel with the wall).
Note
• Be sure to fasten the Wall-Mount Attachment when attaching them to the TV.
Use only a flat head screwdriver to install the Wall-Mount Attachment. Use of another tool might result in over
torqueing the Wall-Mount Attachment and damaging the TV.
• If using an electric screwdriver, set the torque at approximately 1.5 N·m {15 kgf·cm}.
Wall-Mount Attachment 
(supplied with the TV)
GB
21 GB