Troubleshooting - Fagor FG2140 Manual De Instrucciones

1. Place the blending jug on the drive unit and pour in a little lukewarm water containing dish- washing
detergent.
2. Place the lid and the filler opening lid (see Use of the device) properly on the blender.
3. Now plug the power cord into a regulation-compliant contact protected wall outlet (make certain
that the speed selector is in the "0" position).
4. Now move the speed selector to position "P" (Pulse function).
5. Now press the push-button for the pulse function several times.
6. Now remove the blending jug from the drive unit and rinse it out with clean water.
The components of the blender are not suitable for washing in the dishwasher. The two lids
can be washed in warm water with dish-washing detergent. They must then be thoroughly rinsed with
clean water.
Allow all parts to dry completely after cleaning.
Any other servicing should be performed by an authorized services representative.
TROUBLE SHOOTING:
Fault:
The appliance shows no
function.
The blade unit is not turning.
If you experience any faults that are not listed here, please contact our customer service department.
Our customer service staff will be glad to help you. The contact information of our service department
is listed in our warranty conditions.
The plug is not plugged into the
contact-protected wall outlet.
The speed selector has not been
turned far enough.
The blending jug is not correctly
seated on the drive unit.
An unsuitable foodstuff is in the
blender.
25
Cause:
Plug the plug into the contact-
protected wall outlet.
Turn the speed selector
clockwise until the appliance
starts up.
Turn the speed selector to the
"0" position and unplug the plug.
Place the blending jug properly
in position on the drive unit, as
described in "Using the
appliance.
Turn the speed selector to the
"0" position and unplug the plug.
Empty the jug.
Remedy: