Autoadapt Turny Evo Manual De Instalación página 37

Install the cross beams and adapt the construction
1
Place the cross beams above OEM seat attachment so that Turny Evo can be
installed at the desired distance from the door. Use the application tool with the
fixed L-profile brackets to find out which option below is relevant.
Turny Evo
L-profile bracket
towards door
Turny Evo
L-profile bracket
towards door
Option A
- OEM seat attachment ends up outside the attachment of
Turny Evo. The L-profile bracket towards the door must
be adapted for the cross beams.
Option B
- OEM seat attachment ends up inside the attachment
of Turny Evo. The cross beams can be shortened so
that the L-profile bracket covers the whole side.
37
Getting seated Turny Evo
EN