Eye Protection - Smarter tools MIG-125 Manual De Instrucciones

1.6 Eye Protection

Eye and fac p e rotectors for welding and related tasks, such as grinding and
chippin g, should comply with the requirements of ANSI Z87.1. Look for labels or
markings i ndicating compliance. Depending on the specific work task,
appropri ate eye/face protection ma
(side shields or
curtains, or co mbinations of the above.
•
Cho ose a tight fitting helmet to help reduce light reflection into the helmet
throug h the space between the shell and the head.
•
We ar the helmet correctly. Do not use it as a hand shield.
•
Protect the shade lens from impact and sudden temperature change
could cause
•
Use a cover lens to protect the filter shade lens. Replace the cover lens if it
gets scratched or hazy.
•
Make sur e to replace the gasket periodically if your helmet uses one.
•
Replace the clear retaining lens to protect your eyes from broken piece
•
Clean lenses periodically.
•
Discard pitted or damaged lenses.
wrap-around frames), goggles, face shields, we
it to crack.
y include safety glasses with side protection
1‐10
lding helmets,
s that
s.