Polygroup SUMMER WAVES RP350 El Manual Del Propietario página 11

5. Lubricate the O-rings on the Suction Fitting and the Filter Pump Inlet
with petroleum jelly (not included). Connect the Hose
Suction Fitting to the Filter Pump Inlet.
q
7. Tighten all Hose Clamps to prevent water leakage.
q
4
10
9
9. Air is now trapped inside the Filter Pump system, which will prevent the
water from flowing smoothly. To VENT the system (release the
trapped air), open the Vent Screw
turning it counter-clockwise. The water pressure will force out all the
trapped air inside the Filter Pump system. Tighten the Vent Screw
when you see water flowing out from the Seal Top
14
from the
9
at the top of the pump by
e
e
.
t
12
OWNER'S MANUAL
6. Lubricate the O-rings on the Return Fitting and the Filter Pump Outlet
with petroleum jelly (not included). Connect the Hose
the Return Fitting to the Filter Pump Outlet.
8. Do not plug in the filter pump at this point. Begin to fill the pool with water
until the water level reaches the fill line.
Fill Line
10. Adjust the Return Fitting Diverter
pool water.
Inside Pool Wall
360°
It is recommended to point the diverter
down and away from the suction or
water intake for optimum pool circulation.
from
9
to maximize the circulation of the
7
11