Setup Instructions - Polygroup SUMMER WAVES RP350 El Manual Del Propietario

Before assembling your product, please take a few minutes to check the contents and become familiar with all the parts.
WARNING:
CLIMBING HAZARD! PLEASE PREVENT CHILDREN FROM CLIMBING ON THE FILTER CANISTER TO GAIN ACCESS TO THE POOL.
1. Set up the pool by following all the instructions that come with the pool. Do not
fill with water until the Filter Pump is properly installed. Locate the Outlet and
Inlet openings on the pool wall.
Inlet
Outlet
3. Lubricate the Fitting Gasket with petroleum jelly (not included)
and install the Return Fitting on the Inlet opening of the pool.
Inside Pool Wall
10

SETUP INSTRUCTIONS

Outside Pool Wall
2. Lubricate the Fitting Gasket with petroleum jelly (not included) and
install the Suction Fitting on the Outlet opening of the pool.
Outside Pool Wall
4
4. Remove the Filter Pump , Hoses
w
the package.
11
2
1
3
Inside Pool Wall
, and Hose Clamps from
9 q
9
10