DAITEM SH402AX Manual De Instalación página 103

2. • For the siren to be installed there must be a space of 6 cm to the left of the base,
4 cm above and 18 cm below. This clearance allows for the siren to be easily
opened or locked.
• Fix the base at 3 points:
2.
Pozidriv 2
Pozidriv 2
Detachable tamper
mechanism washer
3. Position the siren at an angle of 45° (A)
in relation to the base and insert the pivots
on the base into the hinges.
Insert adjustable fixing washers here
A
45°
(A) 45°
6 cm
wall
Tamper hole
with washer (A)
4. Close the siren and lock it using the
screw located inside the product.
Bottom view of siren
Siren locking
103
GB
4 cm
18 cm
Siren opening