Indication Of Audible Signals And Door Bell; Modification Of Speech Synthesis System Language; Triggering Upon Intrusion - DAITEM SH402AX Manual De Instalación

GB

4.5 Indication of audible signals and door bell

This function is factory-set to be enabled. It can be deactivated if required. To do this, enter:
siren n°
Factory setting: 1
4.6 Validation of radio link in installation mode
This function is used to validate the radio link test in installation mode on 1 of the 2 radio
bands. To switch to 2 bands, enter:
siren n°
Factory setting: 0
4.7 Modification of speech synthesis system language
The French language can be replaced by another language according to the user's
nationality. To do this, enter:
siren n°
Factory setting: 0

4.8 Triggering upon intrusion

The alarm is factory-set to be triggered as soon as an intrusion is detected. This function
can be deactivated or activated for intrusion confirmed indications only. To do this, enter:
siren n°
Factory setting: 1
0: disabled
1: enabled
0: validation on 1 of the 2 bands
1: validation on 2 bands
0: French 3: Spanish
1: Italian 4: Dutch
2: German 5: English
0: disabled
1: single or confirmed intrusion
2: confirmed intrusion only
98