Altitude And The Decompression Algorithm; Prohibited Altitude - SCUBAPRO UWATEC Galileo Luna Manual Del Usuario

Ocultar thumbs Ver también para Galileo Luna:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

3. diving with Galileo
3.6
Altitude and the
decompression algorithm
Atmospheric pressure is a function of
altitude and of weather conditions. This
is an important aspect to consider for
diving, because the atmospheric pressure
surrounding you has an influence on on-
gassing and off-gassing of nitrogen. Above
a certain altitude, the decompression
algorithm has to change in order to account
for the effect of the change in atmospheric
pressure.
Galileo divides the possible altitude range
in 5 classes:
- class 0 (not indicated on the computer
display): from sea level to approximately
1,000m/3,300ft (switch point at
905mbar);
- class 1: from approximately
1,000m/3,300ft to approximately
2,000m/6,600ft (switch point at
815mbar);
- class 2: from approximately
2,000m/6,600ft to approximately
3,000m/1,0000ft (switch point at
725mbar);
- class 3: from approximately
3,000m/10,000ft to approximately
4,000m/13,300ft (switch point at
610mbar);
- class 4: above approximately
4,000m/13,300ft. In this altitude class
Galileo functions in gauge mode only
(automatic switch from computer
mode).
The altitude classes are defined in terms of
approximate elevations because the effect
of weather conditions can make the switch
point pressure occur at different levels.
58
No deco data
gauge mode
Switch point at 610 mbar / 8,85 psi
Switch point at 725 mbar / 10,51 psi
Switch point at 815 mbar / 11,82 psi
Switch point at 905 mbar / 13,82 psi
Galileo deals with altitude automatically: it
monitors the atmospheric pressure every
60 seconds, even when it is turned off, and
if it detects a sufficient drop in pressure, it
does the following:
- it switches on (if it was off);
- it indicates the new altitude range by
means of black segments inside the
stylized mountain and, if applicable, the
prohibited altitude range;
- it indicates the desaturation time, which
in this case is an adaptation time to
the new ambient pressure. If a dive
is started during this adaptation time,
Galileo considers it a repetitive dive,
since the body has residual nitrogen.

3.6.1 Prohibited altitude

Going to altitude, as much as flying after
diving, exposes your body to a reduced
ambient pressure. In a way similar to the
no-fly time, Galileo advises you which
altitude classes are safe to reach after a
dive and which aren't. If you have to drive
over a mountain pass to return home after
a dive, it can be quite important to have this
information.
The
prohibited
altitude
displayed by grey segments inside the
4000 m
13120ft
3000 m
9840ft
2000 m
6560ft
1000 m
3280ft
0 m
classes
are

Publicidad

Tabla de contenido
loading

Tabla de contenido