Honeywell Round Guía De Instalación Profesional página 13

5
Enter the password by pressing
or t to select the first digit
and press OK. Continue for all
four digits.
7
Press s or t to highlight the setting
and press OK. Continue until all
settings have been configured. For a
full list of setup options, see "Setup
options" on page 14.
Note: To exit setup early, press t to
highlight EXIT and press OK.
6
Highlight Set Up and
press OK.
8
When all settings are
configured, save changes.
To save and confirm, highlight
Yes and press OK. To exit
without saving, press t to
highlight No and press OK.
13