SmartPool NC82S Manual Del Usuario página 7

CABLE MAINTENANCE
UNCOILING THE CABLE
In the event that the cable does coil on itself, it can easily be straightened by following the below
instructions.
• Turn the power supply to the off position
• Remove the cleaner from the pool and place it on the far end of the pool deck/yard
(away from the power supply)
• Unscrew the blue cable from the power supply
• Hold the black collar at the plug end and gently lift the cable off the ground
• Gently pull on the cable to straighten
• The swivel will rotate as tension is applied, eliminating the coils in the cable
• Return to normal cleaner use
FIGURE 6
FIGURE 7
STORING THE CABLE
• Unplug the cable from the power supply.
• Hold the cord close to the cleaner.
• Make a roughly two foot loop with the cord.
• When making loop, roll the cable slightly in a counter clockwise manner to maintain form.
DO NOT WRAP THE CORD TIGHTLY AROUND OBJECTS.
STORAGE
WINTER
If temperatures will regularly be below 45 degrees Fahrenheit or 5 degrees Celsius, the
cleaner and power supply should be stored indoors.
SUMMER
The unit should be stored in an area that will afford some protection from the elements to
insure that it retains its finish. DO NOT STORE NEAR OPEN CHEMICALS
7
FIGURE 8
FIGURE 9