Chauvin Arnoux Multimetrix CT 51 Manual De Instrucciones página 9

English
General instructions (continued)
Warranty (contd.)
Unpacking and
Repacking
Maintenance
Metrological
verification
Cleaning
Battery
Storage
CT 51
The warranty does not apply in the event of:
1. improper use of the unit or connection to incompatible equipment
2. modification of the equipment without explicit authorization from the
manufacturer's technical services
3. repair carried out by a person not certified by the manufacturer
4. adaptation to a specific application not provided for in the definition
of the equipment or in the operating instructions
5. an impact, a fall or a flooding.
All the equipment was verified mechanically and electrically before
shipping.
However, we recommend performing a quick check to detect any
damage that may have occurred during transport.
If there is any damage, immediately make the appropriate reservations
to the carrier.
In you need to return equipment, use the original packaging and enclose
written advice of the reasons for the return.
Like all measuring or testing devices, regular instrument verification is
necessary.
Information and address details available on request:
Tel. 02.31.64.51.55 - Fax 02.31.64.51.09
•
Clean your instrument periodically with a damp cloth soaked with
soapy water.
•
Do not use abrasives or solvents.
To open the battery compartment, press on the battery cover at the rear
of the casing of the main unit while sliding to the right.
Remove the used battery and replace it, making sure that the polarity is
correct.
Keep the battery away from children.
If you do not use your instrument for a period longer than 60 days,
remove the battery and store it separately.
9