ASSEMBLY
5
CAREFUL!
Before starting to assemble the equipment, care must be taken in the following cases:
•Certifique que a embalagem não está danificada e que as partes e componentes do equipamento não estão avariadas.
•It is recommended that the equipment be unpacked at the place where it will be assembled.
•The assembly unit must be cleaned.
•The ground should be flat and level, firm / rigid to prevent treadmill instability.
•The space around the equipment must be free as described in this Manual (see Operational Instruction Chapter).
•It is recommended that the equipment be assembled away from moisture and away from sunlight in order to avoid damaging
the electronic parts of the equipment.
•The icons have a function to instruct the user in which the tool is to be used, how many people should make the assembling,
or cross-tighten the screws without determining the pitch.
TABLE OF SPECIFICATION OF
SCREW TIGHTENING TORQUE
Diameter [mm]
M6
M8
M10
TOOLS
Allen
Fixed Wrench
Torque [N.m]
9-12
22-29
45-58
Wrench
Screw threader
medium torque
Philips
50%
Assembly by two
Don't fully tighten
people is
recommended.
Pliers for
elastic rings
10
ICONS
100%
Fully tighten
the bolts.
the screws.