Operation; Operating Principle And Description - Domus PM-1018 Manual De Uso Y Mantenimiento

Correct earthing is essential to guarantee the safety of users and correct operation.
Voltage and Standard Wiring
Cable cross-section / Fuse
Input terminals, electrical mains connection:

4. OPERATION

4.1.

Operating principle and description

The machine irons the items of clothes that pass between the roller and the heating shoe. The
movement of the roller takes the clothes through the machine and deposits them on the lower tray.
Set the shoe to the open position and fix it in this position using the knob in the centre of the machine.
Power the machine using the mains switch. At this point, the machine is connected to the electricity
supply and powered, the light for the START/STOP button remains lit, indicating that the electrical and
electronic components are live.
Steps to proceed with the ironing:

Press the START button, the green diode lights up indicating that the machine is ready for use.

Select the required temperature as indicated in section 4.5. "Selecting the different types of
fabric".

As soon as the programmed temperature has been reached, unblock the shoe using the knob
and lower it using the pedal, the shoe is released and it is possible to start ironing by preparing
the clothes on the wooden board.

The cylinder automatically pulls the clothes under the shoe.

The ironed clothes can be collected on the tray located below the cylinder.

When the pedal is released, the shoe is separated from the roller, ready to iron another article.
Frequency
No. x mm2 / A
MACHINE
MAIN
S
Ø180
PM-1018 PM-1218
V 230 I
Hz 50 / 60 50 / 60
3X2.5 / 16 3X4 / 20
230 I
23