Metra 99-7009 Instrucciones De Instalación página 3

Mitsubishi Endeavor 2004-up
1. Unsnap and remove entire panel
surrounding radio and A/C controls.
(Figure A)
2. Remove (1) 10 mm nut from the rear
support on the top left of radio on cross
bar behind dash. (Figure B)
3. Remove (3) Phillips screws to remove
factory radio chassis. (Figure C)
4. Remove (4) Phillips screws from the
pocket at the bottom of the radio and
A/C panel and remove the pocket (this
is where the 99-7009 will be mounted).
(Figure D)
Continued to kit assembly
(Figure A)
Dash Disassembly 99-7009
(Figure B)
(Figure C)
(Figure D)
3