1. Manuales
  2. Marcas
  3. Metra Manuales
  4. Sistema Estéreo para Coches
  5. 95-6524B
  6. Instrucciones de instalación

Metra 95-6524B Instrucciones De Instalación

Jeep liberty 2002-2007
Ocultar thumbs
1
2
3
4
5
6
7
8
Tabla de contenido

Publicidad

Enlaces rápidos

Descargar este manual
INSTALLATION INSTRUCTIONS FOR PART 95-6524B
Jeep Liberty 2002-2007
KIT FEATURES
• Double DIN radio provision
• Painted matte black
KIT COMPONENTS
• A) Radio trim panel • B) Brackets
A
B
WIRING & ANTENNA CONNECTIONS (sold separately)
Wiring Harness: • 70-6502
Antenna Adapter: • 40-CR10
METRA. The World's best kits.
APPLICATIONS
95-6524B
1-800-221-0932
™
Dash Disassembly
– Jeep Liberty 2002-2007 ...................................... 2
Kit Assembly
– Double DIN radio provision ................................... 3
TOOLS REQUIRED
• Phillips screwdriver • Panel removal tool
• Socket wrench • Dremel or cutting tool
CAUTION: Metra recommends disconnecting the
negative battery terminal before beginning any
installation. All accessories, switches, and especially
air bag indicator lights must be plugged in before
reconnecting the battery or cycling the ignition.
NOTE: Refer to the instructions included with the
aftermarket radio.
metraonline.com
© COPYRIGHT 2015 METRA ELECTRONICS CORPORATION
Table of Contents

Publicidad

Tabla de contenido
loading

Manuales relacionados para Metra 95-6524B

Resumen de contenidos para Metra 95-6524B

  • Página 1 INSTALLATION INSTRUCTIONS FOR PART 95-6524B APPLICATIONS Table of Contents Jeep Liberty 2002-2007 95-6524B Dash Disassembly – Jeep Liberty 2002-2007 ........2 Kit Assembly – Double DIN radio provision ........3 KIT FEATURES • Double DIN radio provision • Painted matte black KIT COMPONENTS TOOLS REQUIRED • A) Radio trim panel • B) Brackets • Phillips screwdriver • Panel removal tool • Socket wrench • Dremel or cutting tool CAUTION: Metra recommends disconnecting the negative battery terminal before beginning any installation.

  • Página 2: Dash Disassembly

    95-6524B Dash Disassembly 1. Remove ashtray and remove one Phillips screw exposed. (Figure A) 2. Unclip and remove radio/climate control trim panel. 3. Remove (4) Phillips screws Remove this area securing radio. Disconnect and remove radio. 4. Remove the factory climate POWER controls. OUTLET 5. Unclip and remove the 12-volt (Figure A) (Figure B) power plug. 6. Remove the factory panel clips and save for kit assembly. 7. Cut and remove the factory radio shelf (shaded area) from the sub-dash to make room for the aftermarket DDIN radio. (Figure B) Continue to kit assembly...

  • Página 3: Kit Assembly

    95-6524B Kit Assembly Kit preparation 2. Attach the factory climate control Double DIN radio provision to the Metra radio trim panel. 1. Attach the factory panel clips to 1. Mount the radio to the double DIN (Figure A) the Metra radio trim panel. brackets with screws included with 3. Attach factory 12-volt power plug (Figure A) radio. (Figure A) to the Metra radio trim panel. 2. Locate the factory wiring harness (Figure A) and antenna plug in the dash. Metra recommends using the proper mating adapters from Metra and/or AXXESS. 3. Mount assembly into the sub dash. 4. Reassemble dash in reverse order (Figure A) of disassembly using the Metra trim panel instead of factory panel. (Figure A)
  • Página 4 INSTALLATION INSTRUCTIONS FOR PART 95-6524B NOWLEDGE IS OWER Enhance your installation and fabrication skills by enrolling in the most recognized and respected mobile electronics school in our industry. Log onto www.installerinstitute.com or call 800-354-6782 for more information and take steps toward a better tomorrow.

  • Página 5: Características Del Kit

    INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6524B Indice Jeep Liberty 2002-2007 95-6524B Desmontaje del tablero – Jeep Liberty 2002-2007 ........2 Ensamble del ki – Provisión de radio doble DIN ........3 CaraCterístiCas del kit • Provisión de radio doble DIN •...

  • Página 6: Desmontaje Del Tablero

    95-6524B Desmontaje del tablero 1. Retire el cenicero y retire un tornillo Phillips expuesto. (Figura A) 2. Desenganche y quite el panel de la moldura del radio/control de clima. Quitar esta área 3. Quite los (4) tornillos Phillips que sostienen el radio. Desconecte y quite el radio.

  • Página 7: Ensamble Del Kit

    Metra y/o de AXXESS. 3. Monte el ensamble en el sub (Figura A) tablero. 4. Vuelva a armar el tablero en orden inverso al desensamble, usando el panel de la moldura Metra en lugar del panel de fábrica. (Figura A)
  • Página 8 INSTRUCCIONES DE INSTALACIÓN PARA LA PIEZA 95-6524B EL CONOCIMIENTO ES PODER NOWLEDGE IS OWER Mejore sus habilidades de instalación y fabricación Enhance your installation and fabrication skills by inscribiéndose en la escuela de dispositivos electrónicos enrolling in the most recognized and respected mobile electronics school in our industry.

Tabla de contenido