Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
TYPICAL
INSTALLATIONS
Housing
mounted to
I-joists.
Use I-joist
spacer block
(provided).
Housing
mounted
anywhere
between
I-joists
using
hanger bars.
Housing
mounted to
joists.
Housing
mounted
anywhere
between
joists
using
hanger bars.
Housing
mounted to
truss.
VENTILATION FAN
Housing mounted
anywhere between
trusses using
hanger bars.
PLAN THE INSTALLATION
NOT FOR USE IN
A COOKING AREA.
INSULATION
(Place around and
over fan housing.)
FAN
HOUSING
POWER
CABLE*
Seal gaps
around
housing.
6-IN. ROUND
DUCT*
Seal duct
joints with
*Purchase
tape.
separately.
The ducting from this fan to the outside of the building has a strong effect on the
air flow, noise and energy use of the fan. Use the shortest, straightest duct routing
possible for best performance, and avoid installing the fan with smaller ducts than
recommended. Insulation around the ducts can reduce energy loss and inhibit
mold growth. Fans installed with existing ducts may not achieve their rated airflow.
MODEL QTXE150
COOKING AREA
Do not install above or
inside this area.
o
o
45
45
Cooking
Equipment
OR
6-IN. ROUND
ELBOWS*
Page 2
Floor
ROOF CAP*
(with built-in
damper)
Keep duct
runs short.
WALL CAP*
(with built-in
damper)
Publicidad
Tabla de contenido
