Interrupting A Measurement - ProMed PBM-3.5 Instrucciones De Empleo

Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 60
OPERATING THE UNIT
Measurement
After the arm cuff has been suitably positioned you can start the meas-
urement.
1.
Press the START / STOP button (A) and all symbols appear on
the display. After the display flashes 0 you will hear 2 short signal
tones for 2 seconds. The pump now starts to inflate the arm cuff
and the rising pressure in the arm cuff is shown on the display.
2.
After the suitable pressure has been reached, the pump is stopped and the pressure falls
gradually. The arm cuff pressure is shown on the display. In the event that the inflation is
insufficient, the pump starts to achieve a higher pressure independently by further inflation
pumping.
3.
As soon as the device can measure a heartbeat, this is indicated
by a flashing of the pulse rate display (4)
a signal tone for each heartbeat.
4.
When the measurement has been completed, you will hear a long
tone. In the meantime the systolic and diastolic blood pressure
and pulse are shown on the display.
5.
You can read the measured values on the display until you switch
off the device. If no button is pressed for a period of 3 minutes,
the device switches itself off automatically to save electricity.
Please note:
If kPa is displayed as a unit, you have chosen this unit of measurement during setting. In order
to have mmHg displayed, you must switch the unit of measurement.
The symbol
is shown together with the measured values if an irregular heartbeat is
ascertained during the measurement.

Interrupting a measurement

If for some reason (e.g. feeling unwell) it is necessary to interrupt the measurement of the blood
pressure, this can be done at any time by pressing the START / STOP button (A). This causes
the arm cuff pressure to be reduced immediately and the measurement to be interrupted.
Data storage of the measurement results
This blood pressure meter saves 90 measurement results per user. As soon as there are more
than 90 measured values per user, the oldest entry is deleted.
, and you can hear
25
DE
EN
FR
IT
ES
NL
RU
PL
SE
FI

Publicidad

Tabla de contenido
loading

Tabla de contenido