Display Speed; Surface Light; Timer; Vent Fan - GE JVM1490 El Manual Del Propietario

About the other features.
OPTIONS
TURN TO SELECT
PUSH TO ENTER
SURFACE
LIGHT

TIMER

TURN TO SELECT
PUSH TO ENTER

VENT FAN

24

Display Speed

The scroll speed of the display can
be changed.
Press the OPTIONS button and turn the
1
dial to select DISPLAY SPEED. Press the
dial to enter.
Turn the dial to select slowest to fastest.
2
Press the dial to enter.

Surface Light

Press SURFACE LIGHT once for bright light,
twice for the night light or a third time to
turn the light off.
Timer
The Timer operates as a minute timer and
can be used at any time, even when the
oven is operating.
Press the TIMER button.
1
2 Turn the dial to select the minutes.
Press the dial to enter.
3 Turn the dial to select the seconds.
Press the dial to enter
Press the dial or TIMER to start.
4
Vent Fan
The vent fan removes steam and other
vapors from surface cooking.
Press VENT FAN once for low fan speed,
twice for high fan speed or a third time
to turn the fan off.
NOTE: The FAN indicator will be lit while
the fan is operating.
To cancel, press the TIMER button.
When time is up, the oven will signal.
To turn off the timer signal, press TIMER.
NOTE: The TIMER indicator will be lit while the
timer is operating.

Automatic Fan

An automatic fan feature protects the
microwave from too much heat rising from
the cooktop below it. It automatically turns
on if it senses too much heat.
If you have turned the fan on you may find
that you cannot turn it off. The fan will
automatically turn off when the internal
parts are cool. It may stay on for 30 minutes
or more after the cooktop and microwave
controls are turned off.