Echo REPOWER 90080 Instrucciones De Instalación página 2

2
11. Loosen the four (4) bolts (E) and remove locator bolt (F) on 90080
cutting attachment.
12. (PPSR-2122/2433 Only) Insert collar (G) into cutting attachment
(long end of collar first) until locator holes (F) are aligned.
13. Slide cutting attachment onto aluminum shaft tube. Be certain
inner drive shaft (H) engages into square socket (I) of cutting
attachment.
14A. (PPF-2100/2110 Only) Align locator hole (F) in cutting attachment
with locator hole in aluminum shaft tube.
14B. (PPSR-2122/2433 Only) Align locator hole (F) in cutting attach-
ment and collar with locator hole in aluminum shaft tube.
15. Install and tighten locator bolt (F). Tighten four (4) cutting
attachment bolts (E).
16A. (PPF-2100/2110 Only) Loosen harness clamp screw (J), two (2)
throttle grip clamping screws (K) and engine fan housing clamp
bolt (L).
E
F
F
H
I
F
E
J
K
G
L