C Special Playback Function; Repeat; Program; Random Playback - Insignia IS-TV040921 Manual Del Propietário

REPEAT

REPEAT is available only during playback.
REPEAT TITLE / CHAPTER
To activate the repeat function, press [REPEAT]
during playback.
¡
The repeat mode changes as described below every
time you press the button.
CHAPTER
(current chapter repeat) (current title repeat)
NOTES:
¡
Repeat Title/Chapter is not available with some
scenes.
¡
The REPEAT setting will be cleared when moving
to other title or chapter.
REPEAT TRACK
To activate the repeat function, press [REPEAT]
during playback.
¡
The repeat mode changes as described below every
time you press the button.
TRACK
(current track repeat) (entire disc repeat)
NOTES:
¡ Repeat setting will be cleared when moving to other
track.
¡
Repeat playback does not function during A-B
repeat playback.
A-B REPEAT
1
Press [A-B] at your chosen starting point.
¡ " A-" appears briefly on the TV screen.
2
Press [A-B] again at your chosen end point.
¡
" A-B" appears briefly on the TV screen, and the
repeat sequence begins.
3
To exit the sequence, press [A-B].
NOTES:
¡
The A-B repeat section can only be set within the
current title (for DVDs) or current track
(for Audio CDs).
¡ A-B repeat is not available with some scenes in
DVD.
¡ To cancel the A point which was set, press
[CLEAR].
¡
A-B repeat playback does not function during title,
chapter, track or all repeat playback.
SPECIAL PLAYBACK FUNCTION
DVD-V
TITLE
(repeat off)
CD
ALL OFF
(repeat off)
DVD-V CD
You may determine the order in which tracks will play.
1
In the stop mode, press [MODE].
¡ The "PROGRAM" screen will appear.
Press [▲ / ▼] to select a track, then press
2
[ENTER].
¡ Press [CLEAR] to erase the
most recently entered track.
OFF
¡ If the entire Program cannot be
displayed at once on a screen,
"G" appears to go to the next
page and " H" appears to go
back to the previous page.
3
Repeat step 2 until you have selected all the
tracks you want to play in the program.
4
Press [PLAY O] to play the programmed tracks.
NOTES:
¡ While the program is being played back, pressing
[STOP C] works as follows.
¡
Press [STOP C] once and then [PLAY O] again,
playback will restart from the point where
[STOP C] was pressed. (Program continued)
¡ Press [STOP C] twice and then [PLAY O] again,
playback will restart from the track in the usual
way. (Program canceled)
¡ Up to 99 tracks can be entered.
¡
To erase all tracks in the program at once, select
"ALL CLEAR" at the bottom of the list at step 2.
¡
If you like to repeat the current track in the pro-
gram, press [REPEAT] several times until "
TRACK" appears during playback. If you like to
repeat the entire program press [REPEAT] several
times until "

RANDOM PLAYBACK

This function shuffles the playing order of tracks
instead of playback in the sequence.
1
In the stop mode, press [MODE] twice.
¡
"RANDOM" screen appears.
2
Press [PLAY O] to start random playback.
NOTE:
¡
If you like to repeat the current track in the random
selection, press [REPEAT] several times until "
TRACK" appears during playback. If you like to repeat
the entire random selection press [REPEAT] several
times until "
- 23 -

PROGRAM

PROGRAM
CD-DA
ENTER
PLAY
CLEAR
ALL" appears during playback.
RANDOM
CD-DA
PLAY
ALL" appears during playback.
CD
TOTAL 1:03:30
1 3:30
1 3:30
5 5:10
2 4:30
10 4:20
3 5:00
11 3:00
4 3:10
12 3:20
5 5:10
17 4:10
6 1:30
22 2:50
7 2:30
1/4 2/3
1 3:30
CD
TOTAL 0:45:55
RANDOM PROGRAM
- - no indication - -
EN