Descargar Imprimir esta página

Kettler CYCLE P Manual De Instrucciones página 5

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
licensed for KETTLER Sports apparatus and available from the Sport
specialized trade.
• The exercise cycle has a magnetic brake system.
• The equipment is dependent of revolutions per minute.
!
Ensure that your working area is free of possible sources
of danger, for example don't leave any tools lying around.
Always dispose packaging material in such a way that it may
not cause any danger. There is always a risk of suffocation if
children play with plastic bags!
• Ensure that you have received all the parts required (see check
list) and that they are undamaged. Should you have any cause
for complaint, please contact your KETTLER dealer.
• Before assembling the equipment, study the drawings carefully
and carry out the operations in the order shown by the diagrams.
The correct sequence is given in capital letters.
• The equipment must be assembled with due care by an adult
person. If in doubt call upon the help of a second person, if pos-
sible technically talented.
• Please note that there is always a danger of injury when working
with tools or doing manual work. Therefore please be careful
when assembling this machine.
When ordering spare parts, always state the full article number,
spare-partnumber, the quantity required and the S/N of the product
(see handling).
Art.no. 07629-500 / spare-part no. 68009040
/ 1 pieces / S/N ....................
Please keep original packaging of this article, so that it may be
used for transport at a later date, if necessary.
Goods may
be returned after prior arrangement and in
(internal) packaging, which is safe for transportation, in the original
box if possible.
It is important to provide a detailed defect description / damage
report!
spare part prices do not include fastening material; if
fastening material (bolts, nuts, washers etc.) is required, this should
be clearly stated on the order by adding the words
.
• Before use, always check all screws and plug-in connections as
well as respective safety devices fit correctly.
• Always wear suitable shoes when using.
• Nobody may be in the moving range of a training person during
training
• The fastening material required for each assembly step is shown
in the diagram inset. Use the fastening material exactly as
instructed.
• Bolt all the parts together loosely at first, and check that they have
been assembled correctly. Tighten the locknuts by hand until resis-
tance is felt,
nections have been tightened firmly.
been unscrewed they no longer function correctly (the locking
device is destroyed), and must be replaced.
• For technical reasons, we reserve the right to carry out preliminary
assembly work (e.g. addition of tubing plugs).
KETTLER products are recyclable. At the end of its useful life please
dispose of this article correctly and safely (local refuse sites).
KETTLER GB Ltd.
GB
Kettler House, Merse Road
North Moons Moat
Redditch, Worcestershire B98 9HL
www.kettler.co.uk
l
USA
1355 London Bridge Road
Virginia Beach, VA 23453
Then check that all screw con-
once locknuts have
+44 1527 591901
+44 1527 62423
e-mail:
sales@kettler.co.uk
+1 888 253 8853
+1 888 222 9333
5

Publicidad

loading

Este manual también es adecuado para:

Rotus pCorsa p07628-9x0