Back Panel Features - Klipsch RW-10d El Manual Del Propietario

RW-10d, RW-12d, RSW-10d
Management information. From this screen press the down
or up cursor key to access other control settings.
"Phase" - This screen is used to adjust the subwoofer's acoustic
phase to match that of your main speakers. Use the Left/Right
cursor keys to adjust the subwoofer's phase from 0° to 180°.
The proper setting of this control is highly dependant on room
acoustics and the position of your subwoofer in the room. After
setting the volume and lowpass controls set the phase to 0˚ and
listen to a recording with a prominent, repeating bass line in your
intended listening position. Repeat this process with the 180°
setting and use the setting that yields the greatest amount of
bass output. If neither of these settings is better than the other
experiment with intermediate settings. From this screen press the
down or up cursor key to access other control settings.
"Save Settings:" - This screen is used to store all of the above
control settings in one of three memory presets ("Music", "Movie"
and "Night"). Use the Left/Right cursor keys to select the desired
preset and press the Enter key to store your current control set-
tings. "Settings Saved!" will be displayed. After the settings are
stored in memory the display will return to the default "Volume"
adjustment screen. From this screen press the up or down cursor
key to access other control settings.
"Disp Brightness" - This screen is used to adjust the brightness
level of the display screen. Use the Left/Right cursor keys to
select from any one of 4 different brightness intensities. From
this screen press the down or up cursor key to access other
control settings.
"Power:" - This screen is used to select the "Auto On" or the
"Always On" power mode for the Subwoofer's amplifier. Use the
Left/Right cursor keys to select between these two modes. When
"Auto On" is selected, the subwoofer will automatically turn on
when it senses a signal. It will automatically turn off after 20
minutes if no signal is present and "Standby" will be displayed. In
the "Always On" setting the subwoofer will remain on as long as
the main A/C power switch on the subwoofer's rear panel is in
the "ON" position. From this screen press the down or up cursor
key to access other control settings.
"Keypad Lock" - This screen is used to lock the keypad and
prevent your settings from being changed by other users. After
making all desired adjustments press the Center key to lock the
keypad. "Keypad Locked Hold
displayed. The display will then return to the default "Volume"
screen. To unlock the keypad press and hold the Left and Right
keys until "Keypad Unlocked" is displayed. The display will again
return to the default "Volume" screen. It is suggested that you
write down all of your settings for future reference in case the
keypad is unlocked and your settings are changed by
another user.
and to unlock" will be
For more information on the controls mentioned in this manual
and on the bass management settings of your electronics, see
your authorized Klipsch dealer or visit www.klipsch.com.

BACK PANEL FEATURES

"POWER" ON/OFF - This is the main A/C power switch for the
subwoofer. This switch must be in the "ON" position for the sub-
woofer to operate and for the "AUTO/ON" feature to function. Set
this switch to the "OFF" position if the subwoofer will not be used
for an extended period of time (i.e. vacation).
IR SENSOR - An infrared remote control sensor is included on
the rear panel of your subwoofer for integration with A/V remote
control systems. The IR codes for this subwoofer can be obtained
by visiting www.klipsch.com. A dedicated hand held remote
control does not exist for these models.
CARE AND CLEANING OF YOUR POWERED SUBWOOFER
Your subwoofer has a durable vinyl finish that should only require
dry dusting or cleaning with a dry cloth. Avoid the use of abrasive
or solvent-based cleaners and harsh detergents. The brush
attachment of your vacuum should remove any dust from your
subwoofer enclosure.
WARRANTY — U.S. AND CANADA ONLY
The Warranty below is valid only for sales to consumers in the United
States or Canada. KLIPSCH, L.L.C. ("KLIPSCH") warrants this product
to be free from defects in materials and workmanship (subject to
the terms set forth below) for a period of five (5) years from the date
of purchase. During the Warranty period, KLIPSCH will repair or
replace (at KLIPSCH's option) this product or any defective parts
(excluding electronics and amplifiers). For products that have
electronics or amplifiers, the Warranty on those parts is for a period
of two (2) years from the date of purchase.
To obtain Warranty service, please contact the KLIPSCH authorized
dealer from which you purchased this product. Proof of purchase in
the form of a bill of sale or receipted invoice, which is evidence that
this product is within the Warranty period, must be presented or
included to obtain Warranty service.
This Warranty is invalid if (a) the factory-applied serial number has
been altered or removed from this product or (b) this product was
not purchased from a KLIPSCH authorized dealer. You may call
1-800-KLIPSCH to confirm that you have an unaltered serial
number and/or you purchased from a KLIPSCH authorized dealer.
This Warranty is only valid for the original purchaser and will
automatically terminate prior to expiration if this product is sold or
otherwise transferred to another party.