Technoline WT 496 Manual De Instrucciones página 16

2. Then press and hold SET/ ALM, the hour digits flash. Press 6:00 and
appear.
3. Once the alarm is selected, then press and hold SET/ ALM until the
hour digit flash. Then press
and hold
4. Press SET/ ALM once again, the minute digits flash. Then press
to set the alarm in minutes. Press and hold
setting at high speed.
Press SET/ ALM once again, "1-7" flash, press
5.
5" or "6-7" or "1-1".
1-7 = Monday to Sunday only (Daily)
1-5 = Monday to Friday only
6-7 = Saturday and Sunday only (Weekends)
= one time one day alarm only (special day alarm)
1-1
Press SET/ ALM once again, "HI" flash, press
6.
or "LO" alarm sound.
HI = Hi / loud alarm sound
LO = Low / soft alarm sound
7. Press SET/ ALM once again or if no key pressed for approx. 10
seconds to exit the setting of the corresponding alarm.
or to accelerate setting in fast speed.
or to set the alarm in hours. Press
(Weekdays)
EN. 5
or to accelerate
to select "1-
or
to select "HI"
or
or