Technoline WT 496 Manual De Instrucciones página 19

reset it to come on the following day. After that the alarm icon remains
static on the display.
TO USE THE BACKLIGHT
At normal time display, press
seconds and then go off.
WARNING: constant use of the backlight will significantly reduce the
life expectancy of the batteries.
TO USE THE NIGHT-LIGHT DISPLAY
Your clock has a programmable night-light display for you to view time in
the dark.
1. At normal time display, press and hold
"OFF" flash on the LCD display, press
"OFF".
2. Press
Night-Light starting hours.
3. Press
"5 Hr" or "7 Hr" as the Night-Light duration.
4. Press
your clock will return to normal time display.
LOW BATTERY ALERT
When the battery level becomes low, an low battery icon
the lower middle of the LCD. Replace old batteries with new alkaline
batteries.
TROUBLE SHOOTING
If your clock displays irrelevant time or does not function properly, which
may be caused by electro-static discharge or other interference, slide open
the battery cover, take out the batteries and reinstall them by observing the
correct +/- polarity. Your unit will be reset to default settings and you need
to set it again.
once again, "0:00" flash, press
once again, "6 Hr" flash, press
once again or if no button press in around 10 seconds,
once, the light will last for around 5
or
EN. 8
, the appears and
button to select "ON" or
or button to set the
or button to select
will apear on