Disconnecting The Battery; Caring For The Printer - LEITZ ICON Guia Del Usuario

Leitz Icon Printer User Guide

Disconnecting the Battery

When disconnected from the printer, the battery should be stored in a cool, dry place.
To disconnect the battery
Grip the battery with your thumb on top and one or more fingers on the battery latch.
1.
Squeeze the battery latch open and tilt the bottom part of the battery away from the printer as shown.
2.
Rotate the bottom of the battery up and away from the printer, and then pull the top part of the battery away from the
3.
printer to fully disconnect the battery.

Caring for the Printer

The Leitz Icon printer requires very little maintenance. You may occasionally need to clean the label cartridge
compartment, the exterior of the printer, and the paper path.
If you experience lighter than normal printing or labels are protruding from the label cartridge when the cartridge is
removed from the printer, use the included cleaning card to clean the paper path. Visit the Leitz website at www.leitz.com
for information about ordering additional cleaning cards.
To clean the label cartridge compartment
Push the button on the top of the printer to open the cartridge door.
1.
Wipe the label cartridge compartment with a clean, dry, lint-free cloth.
2.
To clean the exterior of the printer
Wipe the exterior of the printer with a soft, damp cloth.

Do not use cleaning tissues or chemical substances which might damage the surface
NOTE
18
Caring for the Printer