Connecting The Printer Using Usb; Connecting The Printer Using Access Point (Soft Ap) Mode; Connecting The Printer Using Your Wireless Network - LEITZ ICON Guia Del Usuario

Leitz Icon Printer User Guide

Connecting the Printer Using USB

You can connect the printer directly to your computer using the included USB cable.
Software installation must be complete before connecting the printer to your computer.
NOTE
Plug the USB cable into the USB connector located on the back of the printer.
1.
Plug the other end of the USB cable into an available USB port on your computer.
2.
After a brief period, the printer is available in the printer list.

Connecting the Printer Using Access Point (Soft AP) Mode

The printer can act as its own access point, or Soft AP , allowing a direct wireless connection between the printer and your
computer. Using access point mode, you can wirelessly connect the printer to your computer without connecting to an
existing wireless network.
To connect the printer using access point mode
On your computer, search for available wireless networks.
1.
For information on searching for wireless networks, see the documentation for your computer.
From the list of available networks, select ICON_xxyyzz, where xxyyzz is a combination of letters and numbers that
2.
uniquely identify your printer from other Icon printers in the area.
Click Join or Connect.
3.
Once connected, start a web browser on your computer.
4.
In the address bar, type 192.168.1.1 and then press Enter.
5.
Enter your user name and password in the User name and Password boxes.
6.
The default user name and password are as follows.
User name: Admin
Password: password
Changing the user name and password is recommended. See Changing the User Name and Password on page 16
for information on changing the user name and password.
Click OK.
7.
The Printer Setup Wizard starts.
Select your desired language, and then click Continue.
8.
Click Soft AP .
9.
The printer is connected to your computer in access point mode and the Leitz Icon Control Panel is displayed.

Connecting the Printer Using Your Wireless Network

Connecting the printer to your computer using your wireless network is a two-step process.
Connect the printer to your wireless network.
1.
Add the printer to your computer.
2.
9
Getting Started