6.2 When not communicating
6.2.1 Using the keypad caller unit
Activate the outdoor
caller unit
1. Hold the tag in front of the
name label.
Mr et Mme Evêque-Mourroux
1.
Or enter the access code
(2).
Mr et Mme Evêque-Mourroux
2. Press
(3).
3. The latch is unlocked within
5 seconds.
(1) If a position contact is connected.
(2) If you press the wrong button, press
(3) Only applies to the outdoor caller unit with keypad. If the AUTO COMMAND parameter (see
ACCESS/PARAMETERS/AUTO COMMAND menu) is set to ELECTRIC STRIKE, the latch is opened as soon as the tag
is held up to the caller unit or the access code is entered. There is then no need to press
Status display
on the handset (1)
C
C
then enter the access code again.
119
Latch access status
Closed
Open
.
GB