Modifying Access Code Options - DAITEM SC900AX Guía De Utilización

GB

11.3 Modifying access code options

IMPORTANT: the CODES menu is only displayed if the outdoor caller unit has a digicode.
Handset display
in standby mode
RADIO LINK
HANDSET
ACCESS
Menu
4, 5, 6
SIZE
Factory: 4
ADD
Factory: no code
programmed for
the 16 possible
codes
Setting
possible
Can be used to define the number of digits (between 4 and 6)
for the 16 access codes.
To later change the size of the access code, all codes must first
be deleted (see DELETE menu).
Can be used to programme an access code on the outdoor
caller unit so that a side gate, gate or latch can be opened
(restricted to 16 codes max.).
1. Stand in front of the outdoor caller unit with keypad holding
the handset.
2. Press
3. Enter the desired 4 to 6-digit code on the
outdoor caller unit keypad.
4. Each time a new code is entered, an
additional value is added to the counter.
The handset then moves on to the next
screen.
TAGS
PIN
DISPLAY
SONS
PARAMETERS
PULSE
INFO
Using the setting
.
132
SIZE
ADD
NAME
ACTIVE/INACTIVE
DELETE
Mr et Mme Evêque-Mourroux
C
C
C