When Not Communicating - DAITEM SC900AX Guía De Utilización

GB

7.2 When not communicating

7.2.1 Using the outdoor caller unit with keypad
Activate the outdoor
caller unit
1. Hold the tag in front of the
name label.
Mr et Mme Evêque-Mourroux
1. Or enter the access code
(2).
Mr et Mme Evêque-Mourroux
2. Press (3).
3. The gate is activated within
5 seconds
(1) If a position contact is connected.
(2) If you press the wrong button, press
(3) Only applies to the outdoor caller unit with keypad. If the AUTO COMMAND parameter (see
ACCESS/PARAMETERS/AUTO COMMAND menu) is set to GATE, the gate is opened as soon as the tag is held up to
the caller unit or the access code is entered. There is then no need to press
Status display
on the handset (1)
C
C
then enter the access code again.
122
Gate access status
Closed
Open
.