Ostarz SR-Q2100 Guia De Inicio Rapido página 10

English
.................................................................................................................................................................................................................................................................................................
Mark Route:
1. Pressing the "Select" button for 3 seconds to open Setup mode.
2. Pressing the "Reset/Mark" button to mark waypoint coordinates. Use this method to
mark all 99 waypoints.
3. Pressing the "Select" buttons for 3 seconds to close the Setup mode, the waypoint has
now been marked
For more detail instruction, please refer to the user manual in software CD.
H‐5 Software Introduction
QPlanner ™
QPlanner ™ supports organizing preloading POIs and plan your route in advance.
You can edit and upload up to 4 POIs from Google map for Location back mode or 99
waypoints for Route Plan mode.
1. Click from <Start> / <All Programs> / <Qstarz PC Suite (2100)> / QPlanner (2100)
Users have to input product key at the first time of use. The product key is located on the
cover of the software CD. Important: Do not lose your Product Key. Please write the
number down and keep it in a safe place.
.................................................................................................................................................................................................................................................................................................
10
1) Estimated time of arrival shown as TOA.
2) Estimated direct line distance shown as DTG in MI or KM.
3) Current waypoint ID between 1~99.
4) Directional Compass arrow pointing north.
www.Qstarz.com