Ostarz SR-Q2100 Guia De Inicio Rapido página 4

English
.................................................................................................................................................................................................................................................................................................
D. Hardware Function
Hardware Function
Power Jack
Power/Mode select Button
Select/Adjust Button
Start/Stop/Mark/Reset Button
NOTE: The measurement value will be saved even when the device is turned off. Only after
you reset it in Setup mode will its value be erased.
.................................................................................................................................................................................................................................................................................................
4
Take the USB mini cable and connect it to the power
jack (mini USB type) for charging with PC USB
‐Press and hold for 1 sec to power On
‐Press and hold for 3 sec to power Off.
‐After power on SR‐Q2100, press and hold for 1 sec to
switch among Bike/Location Back/Route Plan mode.
After power on SR‐Q2100:
‐Press and hold for 1 sec to display functions/configure
parameters.
‐Press and hold for 3 sec to enter Setup mode.
After power on SR‐Q2100:
‐Press and hold for 1 sec to turn log mode On/Off.
‐Press and hold 3 sec to enable/disable LCD backlight
‐In Setup mode: Press and hold 1 sec to mark locations
or reset parameters setting
Description
www.Qstarz.com