The Irob System En; Nameplate - Abicor Binzel iROB Control Instructivo De Servicio

iROB Control
3.3 The iROB system
Equipment and accessories of the iROB system are shown in the following table.
iROB Pulse
iROB Feed 22
iROB Feed MP (MasterPull)
iROB Cool
iROB Control
iROB Bracket
iROB Clamp
iROB Spool
iROB RI 1000/2000/3000
MF1
MP
WHPPI
Tab. 6

3.4 Nameplate

The remote control is labeled with a nameplate on the back of the housing as follows:
Fig. 1
When making any inquiries, please remember the following information:
• Device type, device number
BAL.0333.0 • 2017-08-31
Robot welding power source
Wire feeder
Connection box for MF1 MasterPull
Coolant recirculator for the robot welding power source
Remote control for the setup of the robot welding power source
Mounting platform for the wire feeder
Fastener for intermediate cable assembly on the robot
Fastening and support for K300 wire spools on the robot
Robot interface
Master feeder size 1 = roll ø 20 mm (drive unit)
Master feeder size 1 MasterPull
Designates the changeable body in the push-pull design
The iROB system
Nameplate
3 Product Description
EN - 7