Medtronic MMT-7512 Guia Del Usuario página 13

5
5. For details on how to enter your sensor settings into your pump or monitor, refer
MiniMed ® XXXG
Xxxx Xxxxxxx
6
6. Connect the 7. Wait for the
transmitter to the
sensor.
to the corresponding user guide.
7 8a
8a. Remove the
green light on the
transmitter to flash.
If the green light
on the transmitter
does not flash,
refer to the
Troubleshooting
section of your
transmitter user
guide.
8b
8b-8c. Cover the transmitter with
adhesive
liner from the
adhesive tab.
- 11 -
8c
the adhesive tab. Do not
pull the tab too tightly.