NAX NAS-5001 Manual De Operación página 10

8. When the speaker is connected to the Wi-Fi (router) successfully, the mode indicator
on front of the speaker will stay lit,
If connection fails, please try again and repeat the above steps.
WHITE
<
PLEASE WAIT
Wait for device to be
3
connected to Wi-Fi...
Don't operate device during Wi-Fi setup.
Please wait for competion of setup.
patiently. It's usuallyfinished in 60
seconds.
Cancel
If you hear a voice prompt with an error
message. Please go back and retry.
Once connected, the following screen
9.
will appear, tap Custom to change to
the desired location name, or tap one
of the names listed below.
<
NAME DEVICE
Custom...
NAS-5001_xxxx
Bathroom
Bed Room
Den
Dining Room
Family Room
Foyer
Garage
and the communication status indicator will remain
CONNECTED
Device is connected to XXXX
Current Wi-Fi strength of device:100%
10. Select the desired Language for Alexa.
CHOOSE LANGUAGE
Please choose your prefered
language for Alexa.
English(United States)
English(United Kingdom)
Deutsch
10
successfully
Next