Bluetooth Operation - NAX NAS-5001 Manual De Operación

Pairing the speaker with Bluetooth devices (mobile phone or music device)
1. Plug one end of the adapter to DC IN jack of the speaker, plug the adapter into the wall
outlet, slide the power switch to ON position to turn on the unit. The mode indicator will
flash blue and green alternatively, wait until the mode indicator turns
2. Press the MODE button repeatedly to turn on Bluetooth mode, the indicator will turn
and flash to indicate it is in pairing mode.
3. Activate the Bluetooth function on your Bluetooth device (mobile phone or music device).
Please refer to the manufacturer's instructions of your device for further assistance.
4. Once you have activated Bluetooth on your device, select the speaker name from the
pairing list of available Bluetooth devices.
The pairing name is "
NOTE:
5. After pairing successfully, Bluetooth indicator will stop flashing and you should hear a tone.
6. If pairing is unsuccessful, turn off the speaker first and then follow steps (1-5) to re-pair.
7. Once you have paired the speaker with a device, the speaker will remember this device
and will pair automatically when the device's Bluetooth is activated within range.
During playback:
Press the WPS button to Play or Pause playback.
Turn the volume knob to adjust the volume.
Only One (1) device can be paired and connected at a time.
NOTE:

BLUETOOTH OPERATION

NAXA NAS-5001
17
GREEN
".
and flashes.
BLUE