Aux In Operation - NAX NAS-5001 Manual De Operación

1. Connect the external audio device to the unit by an
stereo mini jacks:
~ Insert one end to the mobile phone/external audio device; Line Out or AUX Out jack
~ Insert the other end to the AUX IN jack on the rear of the main unit.
MP3 Mobile Phone
Connect to the mobile phone/external
audio device's AUX Out / Line Out jack
(Like an MP3 player, mobile phone,
iPod/iPad, etc.)
2. Plug one end of the adapter to DC IN jack of the unit, then plug the adapter into the wall
outlet, slide the power switch to ON position to turn on the unit. The indicator will flash
blue and green alternatively, wait until the indicator turns
3. Press the MODE button repeatedly to turn to AUX IN mode, the indicator will turn
4. Play music on your external device.

AUX IN OPERATION

(Audio Connection Cable supplied)
18
audio connection cable with 3.5mm
To AUX IN jack on
the rear of the unit
and flashes.
GREEN
AUX IN
.
INdIGO