NAX NAS-5001 Manual De Operación página 8

PREPARATION
Before connecting a device to the unit, download
the "Naxa Resound" app from the Google Play store
or the Apple App store. You can also scan the QR Codes
shown in the Figure below to download and install the App.
CONNECTION
1. Plug one end of the adapter
IN jack of the speaker, then plug the
adapter into the wall outlet. Set the power
switch to the ON position to turn on the
speaker. The mode indicator on the front
of the speaker will flash blue and green
alternatively; wait until it flashes green only.
The speaker is now ready for connection.
2. Turn on the WiFi on your iOS or Android
device (smart phone or tablet with WiFi
function), Connect your iOS or Android
device to the desired WiFi network
(router).
3. Tap the Naxa Resound icon on your iOS or
Android device. It will start to scan and search
for available speakers automatically.
Read the on-screen instructions and tap the
SETUP
to the DC
to continue.
8
The App icon will appear
as shown in Figure below
after installation is successful.
Naxa Resound
AC Wall Outlet
NAXA Wireless
H
Please make sure your device is powered
up. Your phone is connected to XXXX,
please make sure your device is connected
to the same network.