DRAGON WINCH MAVERICK DWM 13000 HD Manual Del Usuario página 42

c. Connect the
wire.
d. Connect the
control wire.
F. coNNectioN For MoDeLs:
Connection diagram - see section F at the end of the ma-
nual.
1. The set includes two pairs of electrical wires (2 red
and 2 black ones), which are used to connect the winch to
the vehicle's electrical system.
2. Use the first pair of the wires (red a and black
connect the relay to the winch motor as follows:
a. Connect one end of the red power wire
motor current bolt marked with a plus sign
washer). Connect the other end to relay pin marked with
c.
b. Connect one end of the black power wire b
motor current bolt marked with a minus sign
washer). Connect the other end to relay pin marked with
D.
3. Use the second pair of power wires (red c and black
d) to connect the relay with the battery as follows:
a. Bolt one end of the red power wire c to the relay pin
a. Connect the other end to the positive "+"
marked with
terminal of the battery through high current switch, e.g.
"disconnecting switch."

white N black relay
wire to the
yellow M wire with the
DWM 000 st
"-"
control b. Connect one end of the black power supply wire d
to relay pin marked with B. Connect the other end to the
green relay negative "-"
4. Use the supplied thin black wire
relay pin marked with B to the control pin marked with .
5. Connect the wired remote as follows:
a. Connect the red F wire to relay pin marked with a.
b. Connect the black g wire to the relay control pin
marked with .
c. Connect the blue H wire to the relay control pin mar-
ked with .
g. coNNectiNg rADio coNtroL For MoDeLs:
b) to
a
to the
"+"
(or red
Connection diagram - see section G at the end of the ma-
nual.
to the
(or white
Connect the wireless control as follows:
a. Connect the
b. Connect the
and the other end (slide) to the control pin marked with .
c. Connect the
marked with .
d. Connect the
with .
www.dragonwinch.com
battery terminal.
DWM 000 st,
DWM 00 st,
DWa 00 st
red i
wire to relay pin marked with a.
black J wire to relay pin marked with B,
white k wire to the relay control pin
yellow L wire to the control pin marked
E
to connect the