Redial Function; Reset Function - Lenco BTX-750 Manual Del Usuario

 Press "< Button (11)" or "> Button (10)" to reject the incoming call.
Tip: Try to speak to the "MICROPHONE (3)" to get the best speakerphone
performance when necessary.
G. REDIAL FUNCTION
If you want to redial the last call from your phone:
1. Press twice the "
will pause and switch to hand-free function for redial.
2. Press the "
Tips: Make sure that your mobile phone has have last dial call used, if not, the
redial for last call function cannot be activated.
H. RESET FUNCTION
1. In some circumstances the Functions of the device can hang and need to be
resettled.
2. Long press "
will be automatically restarted after reset is finished.
Important: Do not reset the device if it is proper working.
I. TROUBLE SHOOTING
Cannot switch on
No sound
Equipment no
response
J. SPECIFICATION
Dimension
Weight
PC Connection
power button 4" to start redial function, the playing music
power button 4" again to end the redial call.
power button 4" for 10 seconds to reset the device, the device
 Check whether the battery level is low
 Check to see if the volume on the headset and mobile
device is set to "minimum".
 Make sure your Bluetooth device is in operational range.
 Check whether the Bluetooth device is connected and
paired successfully.
 Check that the correct audio source is selected
 Reset and restart the device with the reset function.
130mm (L) x 120mm (W) x 33mm (H)
24g (approximate)
USB 2.0 (High Speed)
11