Installing Drills Or Accessories; Preparation For Screwing - Pecol PROFESSIONAL 12V APRO Manual Del Usaurio

3.8. Installing drills or accessories

3.9. Preparation for drilling metal, wood, plastic, glass and fragile ceramics
P.64
PT ES EN FR
Metals, plastics
and composites
Wood and
derived
products
Glass
Ceramics and
fragile minerals
HSS metal drills should be used
at low speeds. If necessary, use
PECOL 220 lubricant for drilling.

3.10. Preparation for screwing

Turn the torque level selection
ring as required for each
application:
Torque
Screwing type
level
Soft materials with
1 - 8 small diametre
screws
Soft materials with
medium diametre
screws or hard
9 - 16
materials with
small diametre
screws
Hard materials
17 - 20 with large diametre
screws
Do not use speed 2 for screwing.
In addition to not being able
to use the machine speed, the
machine will have less torque in
this condition.
P.65
FR EN ES PT