Assembly And Adjustment - DeWalt DW085 Traducido De Las Instrucciones Originales

ASSEMBLY AND ADJUSTMENT

WARNING: Do not place the laser in a position which
may cause anyone to intentionally or unintentionally
stare into laser beam. Serious eye injury may result from
staring at the beam.
Fitting the Warning Label
The safety warnings on the label shown on the laser must be formulated in
the language of the user.
For that purpose, a separate sheet of self-adhesive labels has been
supplied with the tool.
WARNING: Check that the safety warnings on the label have
been formulated in your language.
The warnings should read as follows:
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT
• If the warnings are in a foreign language, proceed as follows:
– Remove the required label from the sheet.
– Carefully place the label over the existing label.
– Press the label in place.
Replacing Batteries (fi g. 3)
The laser uses LR6 (AA-size) batteries.
• Open the battery compartment cover (a).
• Replace the batteries (t). Make sure the new batteries are placed as
indicated.
• Close the battery compartment cover.
WARNING: When replacing batteries, always replace the
complete set. Do not mix old batteries with new ones.
Preferably use alkaline batteries.
ENGLISH
47