Hardware Overview; Front Panel; Rear Panel - Velleman DVR4T1 Guía Rápida

SCHEDULE
SETTINGS
* For selected modes only
7.

Hardware Overview

7.1

Front Panel

 LED indicators
: DVR is powered on.
o
: HDD is reading or recording.
o
 1–4: Press the channel number buttons to select the channel to display.
 : Press to show the 4-channel display mode.
 SEQ: Press to show all screens sequentially in full screen mode. Press again to quit.
 P.T.Z. ( + SEQ): Press
 SLOW: In playback mode, press to play the recorded file slowly.
 ZOOM: Press to enlarge the image of the selected channel (in FRAME or FIELD recording mode).
 AUDIO (SLOW + ZOOM): Press SLOW + ZOOM at the same time to select live or playback audio from audio
channel 1-4.
: live audio from audio channel 1-4 (indicated in white)
o
: playback audio from audio channel 1-4 (indicated in yellow)
o
: audio channel unselected.
o
 PLAY: Press to playback the latest recorded data.
 LIST (Event List Search): Press to quickly search the recorded files by event lists: RECORD / MOTION /
ALARM / TIME / HUMAN DETECTION / IVS / STATISTIC, or select FULL to show all the event logs.
To quickly search the time you want, select QUICK SEARCH. For more details, refer to the full user manual.
 MENU: Press MENU to enter the main menu.
 ENTER: Press ENTER to confirm the setting.
 : Press ▲ / ▼ / ◄ / ► to move up / down / left / right.
In playback mode:
Press  to pause playback.
o
Press  to stop playback.
o
Press  to fast forward.
o
Press  to fast rewind.
o
 : USB port to connect a USB mouse for mouse control
 : USB port to connect a USB flash drive for video backup.
Note: Do not connect two USB mice or two USB flash drives simultaneously.
Note: For a list of compatible USB flash drives, please refer to the appendices in the full user manual.
7.2

Rear Panel

 INPUT (1–4): Connect to the video connector of a camera.
Note: The DVR will automatically detect the video system of the camera; make sure that the cameras are
properly connected to the DVR and powered on before the DVR is turned on.
 VIDEO OUT: BNC.
 AUDIO IN (1): Connect to the audio connector of a camera if the camera supports audio recording.
Note: To make a video backup with audio, make sure the camera which supports the audio function is
connected to the video-in channel and audio-in channel. For example, the audio data from audio channel 1
will be recorded with the video data from video channel 1.
 AUDIO OUT (1): Mono audio output to connect to a speaker.
V. 03 – 28/12/2015
RECORD
DETECTION
ALARM IN
ALARM OUT
PUSH VIDEO
BUZZER
+ SEQ at the same time to enter or exit the PTZ control mode.
DVR4T1
8 ©Velleman nv