Cleaning The Spray Arms - Magic Chef MCSCD6W5 Manual De Usuario

CLEANING THE SPRAY ARMS

The spray arms can be easily removed for periodic cleaning of
the nozzles, to prevent possible clogging. Wash them under
running water and carefully replace them, checking that their
rotary movement is in no way impeded. Grasp the middle of
the spray arm and pull upwards to remove it. Wash the arms
under running water and return them carefully to their place.
After reassembly, check that the spray arms turn freely. If they
do not, check that they have been installed correctly.
KEEPING YOUR DISHWASHER IN GOOD CONDITION
After Every Wash: Turn off the water supply to the appliance and leave the door slightly open so that
moisture and odors are not trapped inside.
Remove the Plug: Before cleaning or performing maintenance, ALWAYS remove the plug from the socket.
No Solvents or Abrasive Cleaners: DO NOT use abrasive cleaners or solvents to clean the exterior or rubber
parts of the dishwasher. Only use a cloth with warm, soapy water. To remove spots or stains from the
surfaces of the interior, use a cloth dampened with water and a little vinegar.
After Long Periods of No Use: It is recommend that you run a wash cycle with the dishwasher empty and
then unplug, turn off the water supply and leave the door of the appliance slightly open. This will help the
door seals to last longer and prevent odors from forming within the appliance.
Moving the Appliance: If the appliance must be moved, try to keep it in the vertical position. If absolutely
necessary, it can be positioned on its back.
Seals: Food particles that remain trapped in the seals may cause odors. Periodic cleaning with a damp
sponge will prevent this from occurring.
20
Figure 15