Magic Chef MCSCD6W5 Manual De Usuario página 22

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

The dishes are
not clean
Unsatisfactory
Washing
Glassware is
cloudy
Black or gray
marks on dishes
Detergent left in
dispenser cups
Unsatisfactory
The dishes are
Drying
not drying
ERROR CODES
Codes
E1
E4
If overflow error occurs, turn off the main water supply before calling for service. If there is water
WARNING:
in the base from an overflow or leak, the water should be removed before restarting the dishwasher.
Improper wash
program selected.
Not enough detergent
was dispensed.
Items are blocking the
path of spray arms.
The filter system
in the base of wash
cabinet is not clean or
is not correctly fitted.
This may cause the
spray arm jets to get
blocked.
Combination of soft
water and too much
detergent.
Aluminum utensils
have rubbed against
dishes.
Dishes blocking deter-
gent cups.
Dishes not loaded
correctly.
Too little rinse aid.
Dishes removed too
soon.
Wrong program
Selection.
Using cutlery with a
low-quality coating.
Meanings
Longer water inlet time
Overflow
Select a more intensive program. Refer to "Wash Cycle
Table".
Use more detergent, or change your detergent.
Rearrange the items so that the spray arms can rotate freely.
Clean and/or fit the filter correctly. Clean the spray arm jets.
Refer to "Dishwasher Care" section.
Use less detergent if you have soft water and select a short
cycle to wash the glassware and to get it clean. See "Wash
Cycle Table"
Use a mild abrasive cleaner to eliminate the marks.
Re-load the dishes properly. See the "Loading the Dish-
washer" section.
Load the dishwasher as suggested in the directions.
Increase the amount of rinse aid or refill the rinse aid
dispenser.
DO NOT empty your dishwasher immediately after washing.
Open the door slightly so that the steam can escape. Begin
unloading the dishwasher only once the dishes are cool
enough to touch. Empty the low basket first. This prevents
water from dripping off dishes in the upper basket.
Short wash cycles use lower temperatures which lessen
performance. Choose a longer wash program.
Water drainage is more difficult with these items. Cutlery
or dishes of this type are not suitable for washing in the
dishwasher.
Possible Causes
Faucet not fully open.
Water intake restricted.
Low water pressure.
Dishwasher is leaking.
22

Publicidad

Capítulos

Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

Mcscd6b5

Tabla de contenido