Before Use - Briteq bt-626 Manual De Instrucciones

ENGLISH
OPERATION MANUAL
Thank you for buying this Briteq
operating instructions very carefully.
FEATURES
This unit is radio-interference suppressed. This product meets the requirements of the current European and
national guidelines. Conformity has been established and the relevant statements and documents have been
deposited by the manufacturer.
 Professional 6 channel Dimmer / Switch pack for 19" rack mounting
 Max load 16A (3680W) per channel with automatic 16A circuit breakers
 Suitable for both inductive and resistive loads
 Can be used to dim incandescent lamps, halogen lamps, low volt halogen lamps with ballast and
dimmable LED-lamps (load must be >100W).
 Outputs equipped with French or German mains sockets (see barcode sticker)
 DMX (3p-XLR + RJ11) and analog 0/10V (dB9) inputs
 Block or individual channel addressing (soft patch)
 Switch/dimmer mode can be set individually for all channels
 Control faders 0-100% for all channels (no external controller needed)
 Preheat control to extend lamp life: 0-6%
 Automatic phase/frequency tracking (45Hz to 63Hz) for improved dimming under difficult conditions.
 LED display for monitoring of all functions, including internal temperature.
 Mains input (200 ~ 240Vac):
o
3-phase/4wire: total max. load = 22kW
o
Single phase/2wire: total max. load = 9,6kW
 Intelligent thermo protection with automatic fan control.
 Dimensions: 483x88x312mm (19"/2U)
 Weight: 8kg

BEFORE USE

Check the contents:
Check that the carton contains the following items:
 BT-626 dimmer pack (German or French outlet sockets)
 4pcs "press-on" foot
 2pcs metal bridge, to be used for single phase connection
 5pcs cable crimp terminal
 5pcs color caps for cable terminal
 User manual
Some important instructions:
 Before you start using this unit, please check if there's no transportation damage. Should there be any, do
not use the device and consult your dealer first.
 Important: This device left our factory in perfect condition and well packaged. It is absolutely necessary
for the user to strictly follow the safety instructions and warnings in this user manual. Any damage caused
by mishandling is not subject to warranty. The dealer will not accept responsibility for any resulting defects
or problems caused by disregarding this user manual.
 Keep this booklet in a safe place for future consultation. If you sell the fixture, be sure to add this user
manual.
 To protect the environment, please try to recycle the packing material as much as possible.
BRITEQ
®
®
product. To take full advantage of all possibilities, please read these
1/30
OPERATION MANUAL
BT-626