TROUBLESHOOTINg
For assistance with your machine, visit our website at
www.portercable.com for a list of service centers or call the
help line at 1-888-848-5175.
MAINTENANCE
SEVERE LACERATION HAZARD. TURN
THE UNIT "OFF," DISCONNECT THE UNIT from the power
source and wait 2-1/2 minutes to allow time for internal rotating
components to stop before installing or removing accessories,
before adjusting or changing set-ups, clearing clogs or when
making repairs.
KEEP MACHINE CLEAN
Periodically blow out all air passages with dry compressed
air. All plastic parts should be cleaned with a soft damp cloth.
NEVER use solvents to clean plastic parts. They could possibly
dissolve or otherwise damage the material.
Wear certified safety equipment for eye,
hearing and respiratory protection while using compressed air.
FAILURE TO START
Should your machine fail to start, check to make sure the
prongs on the cord plug are making good contact in the outlet.
Also, check for blown fuses or open circuit breakers in the line.
SERVICE
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to
order parts, visit our service website at www.portercable.
com. You can also order parts from your nearest PORTER-
CABLE Factory Service Center or PORTER-CABLE Authorized
Warranty Service Center. Or, you can call our Customer Care
Center at (888) 848-5175.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or
replacement of parts. For information about PORTER-CABLE,
its Factory Service Centers or Authorized Warranty Service
Centers, visit our website at www.porter-cable.com or call our
Customer Care Center at (888) 848-5175. All repairs made
by our service centers are fully guaranteed against defective
material and workmanship. We cannot guarantee repairs made
or attempted by others.
You can also write to us for information at PORTER-CABLE,
4825 Highway 45 North, Jackson, Tennessee 38305, (888) 848-
5175 - Attention: Product Service. Be sure to include all of
the information shown on the nameplate of your tool (model
number, type, serial number, etc.).
ACCESSORIES
Since accessories, other than those offered
by PORTER-CABLE, have not been tested with this product,
use of such accessories with this tool could be hazardous. To
reduce the risk of injury, only PORTER-CABLE recommended
accessories should be used with this product.
A complete line of accessories is available from your
PORTER-CABLE Factory Service Center or a PORTER-CABLE
Authorized Warranty Service Center. Please visit our web site
www.portercable.com for a catalog or for the name of your
nearest supplier.
THREE YEAR LIMITED WARRANTY
PORTER-CABLE will repair or replace, without charge, any
defects due to faulty materials or workmanship for three years
from the date of purchase for tools (two years for batteries).
This warranty does not cover part failure due to normal wear
or tool abuse. For further detail of warranty coverage and warranty
repair information, visit www.portercable.com or call (888) 848-5175.
This warranty does not apply to accessories or damage caused
where repairs have been made or attempted by others. This
warranty gives you specific legal rights and you may have other
rights which vary in certain states or provinces.
In addition to the warranty, PORTER-CABLE tools are covered
by our:
1 YEAR FREE SERVICE: PORTER-CABLE will maintain the
tool and replace worn parts caused by normal use, for free, any
time during the first year after purchase.
90 DAY MONEY BACK gUARANTEE: If you are not completely
satisfied with the performance of your PORTER-CABLE power
tool for any reason, you can return it within 90 days from the date
of purchase with a receipt for a full refund – no questions asked.
LATIN AMERICA: This warranty does not apply to products
sold in Latin America. For products sold in Latin America,
see country specific warranty information contained in the
packaging, call the local company or see website for warranty
information.
To register your tool for warranty service visit our website at
www.portercable.com.
WARNINg LABEL REPLACEMENT
If your warning labels become illegible or are missing, call
(888) 848-5175 for a free replacement.
10