Casals HA150032QEAK Manual De Usuario página 3

Ocultar thumbs Ver también para HA150032QEAK:
Tabla de contenido

Publicidad

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 10
English
Rotary hammer
Dear Customer,
Many thanks for trusting to Casals.
Thanks to its continuous effort, our innovation
and the strictest quality controls, Casals devel-
ops electric Power Tools for the toughest jobs.
General Power Tools Safety Warning
WARNING Read all safety warnings
and all instructions, illustrations and
specifications provided with this power
tool.. Failure to follow all instructions listed
below may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for fu-
ture reference.
The term "power tool" in the warnings refers
to your mains-operated (corded) power tool or
battery-operated (cordless) power tool
Work area safety
-Keep work area clean and well lit. Cluttered
or dark areas invite accidents.
-Do not operate power tools in explosive
atmospheres, such as in the presence of
flammable liquids, gases or dust. Power
tools create sparks which may ignite the dust
or fumes.
-Keep children and bystanders away while
operating a power tool. Distractions can
cause you to lose control.
Electrical safety
-Power tool plugs must match the outlet.
Never modify the plug in any way. Do not
use any adapter plugs with earthed (ground-
ed) power tools. Unmodified plugs and match-
ing outlets will reduce risk of electric shock.
ORIGINAL instructions
-Avoid body contact with earthed or ground-
ed surfaces, such as pipes, radiators, ranges
and refrigerators. There is an increased risk of
electric shock if your body is earthed or grounded.
-Do not expose power tools to rain or wet
conditions. Water entering a power tool will in-
crease the risk of electric shock.
-Do not abuse the cord. Never use the cord
for carrying, pulling or unplugging the pow-
er tool. Keep cord away from heat, oil, sharp
edges or moving parts. Damaged or entan-
gled cords increase the risk of electric shock.
-When operating the power tool outdoors,
use an extension cord suitable for outdoor
use. Use a cord suitable for outdoor use reduc-
es the risk of electric shock
-If operating a power tool in a damp location
is unavoidable, use a residual current de-
vice (RCD) protected supply. Use of an RCD
reduces the risk of electric shock.
Personal safety
-Stay alert, watch what you are doing and
use common sense when operating a power
tool. Do not use a power tool while you are
tired or under the influence of drugs, alco-
hol or medication. A moment of inattention
while operating power tools may result in seri-
ous personal injury.
-Use personal protective equipment. Always
wear eye protection. Protective equipment
such as dust mask, non-skid safety shoes, hard
hat, or hearing protection used for appropriated
conditions will reduce personal injuries.
-Prevent unintentional starting. Ensure the
switch is in the off-position before connect-
ing the power source and/or battery pack,
picking up or carrying the tool. Carrying pow-
er tools with your finger on the switch or ener-
gizing power tools that have the switch on in-
vites accidents.
3

Publicidad

Tabla de contenido
loading

Tabla de contenido