Configuring The Terminal - Vokkero GUARDIAN STANDARD Guia Del Usuario

VOKKERO GUARDIAN EUROPE Standard | Plus | Ref | User Guide V2.1.2
EN
1 - Terminal name
To change the name of the terminal, you can use the available
keyboard. Three screens/keyboards are available to de-fine the
product name. To switch between screens/keyboards, use the
button on the bottom right-hand side.
"abc" to switch to the lowercase words screen
"123" to switch to the numbers and symbols screen
"ABC" to switch to the uppercase words screen
Use _____to delete the most recently entered character.
To validate, select
4.3.1.
This screen indicates the terminals present on the configurator. The charge status as
well as the name of each terminal displays. The terminals display in their order of
presence on the configurator, going from the closest (position 1) to the furthest away.
To modify a product, select the product row; this displays all the settings available for
the selected product.
The available settings are as follows:
• Terminal name (1): product name displayed on the LCD
• Microphone action (2): defines the behavior of the audio button in the middle of
the terminal
• Alarm mode (3): defines the operating mode of the alarm
• Voice Gate Preset (4) : Provides access to the voice detector presets
• Advanced Settings (5): Provides access to the following options: Assignment
buttons, Alarm button, Expert mode
• Version (6)
• Factory Setting (7): allows to reset the products to factory settings
on the bottom right-hand side.

Configuring the terminal

52 / 122